Energies (May 2024)

Research on Thermal Adaptability of Flexible Operation in Different Types of Coal-Fired Power Units

  • Haijiao Wei,
  • Yuanwei Lu,
  • Yanchun Yang,
  • Yuting Wu,
  • Kaifeng Zheng,
  • Liang Li

DOI
https://doi.org/10.3390/en17092185
Journal volume & issue
Vol. 17, no. 9
p. 2185

Abstract

Read online

The flexible mode of operation of coal-fired units can accommodate large-scale renewable power integration into the grid, providing more grid capacity. The flexibility transformation of coal-fired units in thermal power plants can be achieved through main steam extraction and reheated steam extraction. A 300 MW subcritical unit, 600 MW subcritical unit and 660 MW ultra-supercritical unit with six flexible operation modes were chosen as the research model to investigate the thermal adaptability for flexible operation. The results show that from the perspective of the source of steam extraction, the main steam extraction scheme is suitable for the flexible adjustment of peak load capacity, and the reheated extraction scheme is suitable for the flexible operation of low load and high thermal efficiency. Moreover, from the perspective of thermal performance adaptability, the 600 MW unit has a wider load regulation capacity than the 300 MW and 660 MW units, and is suitable as the peak shaving unit. This work can provide theoretical guidance for different types of coal-fired units in choosing flexible operation schemes.

Keywords