Scientific Reports (May 2024)

Topology optimization of the flat steel shear wall based on the volume constraint and strain energy assumptions under the seismic loading conditions

  • Xi Chen,
  • Gongxing Yan,
  • Hasan Hosseinzadeh

DOI
https://doi.org/10.1038/s41598-024-61204-1
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 25

Abstract

Read online

Abstract In structural engineering systems, shear walls are two-dimensional vertical elements designed to endure lateral forces acting in-plane, most frequently seismic and wind loads. Shear walls come in a variety of materials and are typically found in high-rise structures. Because steel shear walls are lighter, more ductile, and stronger than other concrete shear walls, they are advised for usage in steel constructions. It is important to remember that the steel shear wall has an infill plate, which can be produced in a variety of forms. The critical zones in flat steel shear walls are the joints and corners where the infill plate and frame meet. The flat infill plate can be modified to improve the strength and weight performance of the steel shear walls. One of these procedures is Topology Optimization (TO) and this method can reduce the weight and also, increase the strength against the cyclic loading sequences. In the current research paper, the TO of the infill steel plate was considered based on the two methods of volume constraint and maximization of strain energy. Four different volumes (i.e., 60%, 70%, 80%, and 90%) were assumed for the mentioned element in the steel shear wall. The obtained results revealed that the topology configuration of CCSSW with 90% volume constraint presented the highest seismic loading performance. The cumulated energy for this type of SSW was around 700 kJ while it was around 600 kJ for other topology optimization configurations.

Keywords