Removal of methylene blue dye from aqueous solutions using polymer inclusion membrane technology

Abstract

Abstract The polymer inclusion membranes (PIMs) containing Cellulose triacetate as polymer base, 2-NPOE as a plasticizer, and Calix[4]resorcinarene (RC8) as a carrier were prepared and characterized. Microstructure and surface of PIMs were characterized by scanning electron microscope, FTIR, UV/vis spectroscopy, and Thermogravimetric Analysis, respectively. In order to obtain information on the composition and interactions that may manifest between the constituents of the membrane. The PIMs were applied in the elimination of Methylene Blue (MB) dye from model solution as synthetic aqueous wastewater. Furthermore, the effects of different parameters such as internal and external PIMs environment on the transport performance of MB were also investigated. The results confirming that the content of the carrier and plasticizer in the membrane had a significant impact on the property of PIMs. The transport of dye was in line with the first-order kinetics equation. The highest flux value "8.88 × 10–7 mol.m−2 s−1 " was obtained with a calix [4] resorcinarene as a transporter in polymer inclusion membrane at pH 11 in the feed and 0.3 M HCl in the stripping phase when MB initial concentration was 100 mg/L. The membrane has better stability under optimum conditions and maximum transport was observed after 30 h of permeation time.

Keywords

• Cellulosic derivative
• Polymer inclusion membrane
• Physical–chemical characterization
• Membrane process
• Methylene blue dye
• Wastewater treatment