Journal of Dairy Science (Apr 2023)
Effect of high hydrostatic pressure processing on the rennet coagulation kinetics and physicochemical properties of sheep milk rennet-induced gels
Abstract
ABSTRACT: The effects of high hydrostatic pressure on the constituents and coagulation ability and their effect on cheese production of sheep milk have not been studied in detail. The objective of this work was to evaluate the effect of high hydrostatic pressure processing on the coagulation kinetics and physicochemical properties of sheep milk and to explore how such treatment could improve the cheesemaking process. Five batches of milk were tested: 1 untreated control batch and 4 batches each subjected to a different pressure (150, 300, 450, or 600 MPa) for 5 min at 10°C. As treatment pressure increased, values of electrical conductivity and oxidation-reduction potential were found to decrease. However, no significant reduction in pH was recorded. Treatment pressures >300 MPa produced milk with lower lightness (luminosity) and a more yellow and green hue. Pressures >150 MPa resulted in micellar fragmentation, as well as significant increases in particle size, viscosity, and water-holding capacity as a consequence of the denaturing of soluble proteins. High-pressure treatments increased the solubility of colloidal calcium phosphate, leading to a considerable increase in the concentration of minerals in the serum phase. The highest concentrations of calcium and phosphorus in the rennet whey of milk were reached at 300 MPa. Curd coagulation time was reduced by 28% at pressures >300 MPa, and an increase in the curd firming rate was observed. As treatment pressure increased to 450 MPa, the firmness, elasticity, and the percentage creep recovery of gels increased, whereas values of compliance and fracture strain were reduced. Thus, we can conclude that 300 MPa is the optimum treatment pressure for milk intended for cheesemaking by enzymatic coagulation. This pressure produced milk with optimal coagulation kinetics and water-holding properties with the least loss of fat and protein to the whey.