Effect of tabebuia heterophylla plant leaves extract on corrosion protection of low carbon steel in 1M HCl medium: Electrochemical, quantum chemical and surface characterization studies.

Abstract

In the current study the chemical constituents of Tabebuia heterophylla plant leaves extract (THLE) evaluated as corrosion inhibitor for low carbon steel (LCS) in 1 M HCl. The major component present in plant extract was Hexadecanoic acid 2-hydroxy-1-(hydroxymethyl) ethyl ester confirmed by Gas Chromatography with Mass spectroscopic (GC-MS) analysis. Electrochemical impedance spectroscopy (EIS), potentiodynamic polarisation (PDP) and weight loss measurements were used to evaluate the THLE ability to protect low-carbon steel surface against corrosion in 1M HCl medium. The maximum inhibition efficiency reported as 95.45%, 93.99% and 94.79% by weight loss measurements, EIS and PDP methods respectively. In the prolongation of the work, the entropy of adsorption (Δ Sa*), enthalpy of adsorption (Δ Ha*), Gibbs free energy of adsorption (Δ Ga*), and activation energy (Ea) of the reaction were calculated. In absence of inhibitor, the Ea value was found to be minimum 49.38 kJ/mol whereas for optimum concentration of THLE it was found to be 77.2 kJ/mol implies more energy is required to undergo corrosion. The surface morphological observation from Scanning Electron Microscope (SEM), Atomic Force Microscopic (AFM) and Contact angle explored the effective adsorption of THLE. AFM values revealed that average surface roughness (Ra) value of LCS is high (188.08), where as in the presence of THLE, Ra values significantly reduced to minimum value of 37.226. Further chemical interactions between THLE and the low-carbon steel surface as well as inhibitory mechanism were further elucidated by theoretical simulations such as Density Functional Theory (DFT) calculations and Molecular dynamics (MD) simulations.

Keywords

• Tabebuia heterophylla
• Low carbon steel
• Tafel plots
• Corrosion current
• DFT