Numerical simulation and experimental investigation of the molten pool evolution and defects formation mechanism of Selective laser melted CuSn20/Diamond composites

Abstract

Some defects such as small pores, thermal damage of diamond particle and micro-cracks between diamond and metal matrix existed in SLM-fabricated metal-bonded diamond tools. For further application, it is vital to understand the formation mechanism of such defects by SLM-fabricated parameters. In this work, a multiphysics field numerical simulation model based on computational fluid dynamics (CFD) was developed to investigate molten pool evolution and defects formation mechanism for SLM-fabricated CuSn20-bonded diamond composites. From simulation results, the metal particles melt and flow forward under the action of the laser. Also, the presence of diamond particles can obstruct the normal flow of melted CuSn20 fluid. Increasing the laser power can widen and stabilize the molten pool, however, exacerbate the thermal damage of diamond particles. Specially, the migration and marginalisation of the diamond particles during the formation of molten pool were found by simulation and experimental results. Unavoidably, there are obvious gaps in the interfacial bonding region of diamond and CuSn20 due to the comprehensive reasons of thermal gradient, differences in thermophysical properties of two materials and undergo continuous migration and rotational behavior of diamond particles. These findings have potential value for understanding and optimizing the process of SLM-fabricated metal-bonded diamond tools.

Keywords

• Selective Laser Melting
• Numerical simulation
• CuSn20/Diamond composites
• Molten pool evolution
• Defects formation mechanism