Modeling the Resonant Behavior of Continuously Reconfigurable FSS Based on Four Arms Star Geometry

Abstract

Abstract A modeling of the resonant behavior of a continuously reconfigurable frequency selective surface, FSS, is described in this paper. The FSS is based on four arms star geometry and its reconfigurability is achieved by the use of varactors. FSS, four arms star geometry and varactor principles are explained. Considering available a set of measured or numerical data, with frequency responses for different varactor capacitance values, the FSS equivalent circuit is stablished. Then, the varactor capacitance effect is included and the resonant behavior can be easily determined. After stablished, the FSS equivalent circuit can be applied even for a different varactor. In order to validate the proposed modeling, the equivalent circuit of a reconfigurable FSS using the varactor SMV1231 (0.466 pF ≤ Cv ≤ 2.35 pF is obtained. The equivalent circuit results are compared to numerical (ANSYS) and measured results, verifying a good agreement. Following, for the same geometry, the equivalent circuit is applied to a reconfigurable FSS using the SMV1234 varactor (1.32 pF ≤ Cv ≤ 9.63 pF) and once more a good agreement between the results is observed, indicating the applicability of the proposed modeling, which is especially attractive for optimization process.

Keywords

• Four arms star
• modeling
• reconfigurable FSS
• varactor