Metals (Jul 2021)
Numerical Study about the Influence of Superimposed Hydrostatic Pressure on Shear Damage Mechanism in Sheet Metals
Abstract
It is generally accepted that the superimposed hydrostatic pressure increases fracture strain in sheet metal and mode of fracture changes with applying pressure. Void growth is delayed or completely eliminated under pressure and the shear damage mechanism becomes the dominant mode of fracture. In this study, the effect of superimposed hydrostatic pressure on the ductility of sheet metal under tension is investigated using the finite element (FE) method employing the modified Gurson–Tvergaard–Needleman (GTN) model. The shear damage mechanism is considered as an increment in the total void volume fraction and the model is implemented using the VUMAT subroutine in the ABAQUS/Explicit. It is shown that ductility and fracture strain increase significantly by imposing hydrostatic pressure as it suppresses the damage mechanisms of microvoid growth and shear damage. When hydrostatic pressure is applied, it is observed that although the shear damage mechanism is delayed, the shear damage mechanism is dominant over the growth of microvoids. These numerical findings are consistent with those experimental results published in the previous studies about the effect of superimposed hydrostatic pressure on fracture strain. The numerical results clearly show that the dominant mode of failure changes from microvoid growth to shear damage under pressure. Numerical studies in the literature explain the effect of pressure on fracture strain using the conventional GTN model available in the ABAQUS material behavior library when the mode of fracture does not change. However, in this study, the shear modified GTN model is used to understand the effect of pressure on the shear damage mechanism as one of the individual void volume fraction increments and change in mode of fracture is explained numerically.
Keywords
