Three-dimensional reconstruction of anomalous eutectic in laser remelted Ni-30 wt.% Sn alloy

Abstract

Laser remelting has been performed on Ni-30 wt.% Sn hypoeutectic alloy. An anomalous eutectic formed at the bottom of the molten pool when the sample was remelted thoroughly. 3D morphologies of the α-Ni and Ni3Sn phases in the anomalous eutectic region were obtained and investigated using serial sectioning reconstruction technology. It is found that the Ni3Sn phase has a continuous interconnected network structure and the α-Ni phase is distributed as separate particles in the anomalous eutectic, which is consistent with the electron backscatter diffraction pattern examinations. The α-Ni particles in the anomalous eutectic are supersaturated with Sn element as compared with the equilibrium phase diagram. Meanwhile, small wavy lamella eutectics coexist with anomalous eutectics. The Trivedi–Magnin–Kurz model was used to estimate undercooling with lamellar spacing. The results suggest that the critical undercooling found in undercooling solidification is not a sufficient condition for anomalous eutectic formation. Besides, α-Ni particles in the anomalous eutectic do not exhibit a completely random misorientation and some neighboring α-Ni particles have the same orientation. It is shown that both the coupled and decoupled growth of the eutectic two phases can generate the α-Ni + Ni3Sn anomalous eutectic structure.

Keywords

• anomalous eutectic
• laser remelting
• ni–sn alloy
• 3d reconstruction