Brazing of Titanium with Aluminium Alloys

Abstract

This study presents results of vacuum diffusion brazing of Grade 2 titanium with 6082 (AlMg1Si0.6Cu0.3) aluminium alloy using B-Ag72Cu-780 (Ag72Cu28) grade silver brazing metal as an interlayer. Brazed joints underwent shear tests, light-microscopy-based metallographic examinations and structural examinations using scanning electron microscopy (SEM) and X-ray energy dispersive spectrometry (EDS). The highest quality and shear strength of 20 MPa was characteristic of joints brazed at 530°C with a 30-minute hold. The structural examinations revealed that in diffusion zone near the boundary with titanium the braze contained solid solutions based on hard and brittle Ti-Al type intermetallic phases determining the strength of the joints.

Keywords

• titanium
• aluminium alloy
• diffusion brazing
• mechanical properties of brazing joints
• brazing parameters