Investigation of ZnO doping on LaFeO₃/Fe₂O₃ prepared from yarosite mineral extraction for ethanol gas sensor applications

Abstract

In this study, we used a natural resource, yarosite minerals, as a Fe2O3 precursor. Yarosite minerals were used for the synthesis of LaFeO3/Fe2O3 doped with ZnO via a co-precipitation method using ammonium hydroxide, which produced a light brown powder. Then, an ethanol gas sensor was prepared using a screen-printing technique and characterized using gas chamber tools at 100,200, and 300 ppm of ethanol gas to investigate the sensor's performance. Several factors that substantiate electrical properties such as crystal and morphological structures were also studied using X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), respectively. The crystallite size decreased from about 61.4 nm to 28.8 nm after 0.5 mol% ZnO was added. The SEM characterization images informed that the modified LaFeO3 was relatively the same but not uniform. Lastly, the sensor's electrical properties exhibited a high response of about 257% to 309% at an operating temperature that decreased from 205 ℃ to 180 ℃. This finding showed that these natural resources have the potential to be applied in the development of ethanol gas sensors in the future. Hence, yarosite minerals can be considered a good natural resource that can be further explored to produce an ethanol gas sensor with more sensitive response. In addition, this method reduces the cost of material purchase.

Keywords

• lafeo₃/fe₂o₃
• zno
• yarosite minerals
• ethanol gas sensors