Natural Gas Industry B (Aug 2020)
Connectivity of pores in shale reservoirs and its implications for the development of shale gas: A case study of the Lower Silurian Longmaxi Formation in the southern Sichuan Basin
Abstract
The unconnected gas-bearing pores in shale gas reservoirs may be transformed into “potential recoverable pores” after large scale hydraulic fracturing. However, the mainstream pore classification methods of shale gas reservoirs, do not take the unconnected pores into account, which impacts the evaluation accuracy of reservoir pore effectiveness. To solve this problem, this paper took the shale of Lower Silurian Longmaxi Formation in the southern Sichuan Basin as the research object to carry out experiments on core porosity, centrifugal + gradual drying NMR after saturated with brine and NMR freeze–thaw using plunger samples and crushed samples to analyze the volume, main development location and main pore size distribution range of unconnected pores. Then, the pore systems were classified, and the lower limit of effective pore size of connected gas-bearing pores was determined. Finally, the total pore effectiveness of shale gas reservoirs was evaluated, and the influence of unconnected pores on the development of shale gas was discussed. And the following research results were obtained. First, there are a large number of unconnected pores in the shale gas reservoirs of the study area, accounting for 30.23%. Most of them are mainly developed in organic matters and a few are developed in clay minerals. The distribution of pore size ranges from 5 nm to 30 nm. Second, T2 cut-off value of clay bound water in the shale gas reservoirs of the study area is 0.26 ms, whose corresponding pore size is 5.35 nm, which is the lower limit of the effective pore size. Third, large-scale hydraulic fracturing can improve the unconnected pores with the size more than 5.35 nm, so effective development of shale gas will be realized. Fourth, after hydraulic fracturing stimulation, the unconnected pores can increase the storage space of fracturing fluid in the matrix, absorb the fracturing fluid in the fractures, replace the shale gas in the pores and promote the automatic alleviation of water lock in shale gas reservoirs, so the single-well shale gas production will be increased. In conclusion, fluid occurrence and pore system in shale pores can be quantitatively divided by means of centrifugal + gradual temperature drying method combined with NMR experiments, mobile water and capillary bound water can be determined by the high speed centrifugal + NMR experiments, and capillary bound water and clay bound water can be determined by the gradual drying + NMR experiments.
