Remote Sensing (Sep 2022)
Generalized LiDAR Intensity Normalization and Its Positive Impact on Geometric and Learning-Based Lane Marking Detection
Abstract
Light Detection and Ranging (LiDAR) data collected by mobile mapping systems (MMS) have been utilized to detect lane markings through intensity-based approaches. As LiDAR data continue to be used for lane marking extraction, greater emphasis is being placed on enhancing the utility of the intensity values. Typically, intensity correction/normalization approaches are conducted prior to lane marking extraction. The goal of intensity correction is to adjust the intensity values of a LiDAR unit using geometric scanning parameters (i.e., range or incidence angle). Intensity normalization aims at adjusting the intensity readings of a LiDAR unit based on the assumption that intensity values across laser beams/LiDAR units/MMS should be similar for the same object. As MMS technology develops, correcting/normalizing intensity values across different LiDAR units on the same system and/or different MMS is necessary for lane marking extraction. This study proposes a generalized correction/normalization approach for handling single-beam/multi-beam LiDAR scanners onboard single or multiple MMS. The generalized approach is developed while considering the intensity values of asphalt and concrete pavement. For a performance evaluation of the proposed approach, geometric/morphological and deep/transfer-learning-based lane marking extraction with and without intensity correction/normalization is conducted. The evaluation shows that the proposed approach improves the performance of lane marking extraction (e.g., the F1-score of a U-net model can change from 0.1% to 86.2%).
Keywords