Mass Transfer Resistance and Reaction Rate Kinetics for Carbohydrate Digestion with Cell Wall Degradation by Cellulase

Abstract

This paper introduces an enzymatic approach to estimate internal mass-transfer resistances during food digestion studies. Cellulase has been used to degrade starch cell walls (where cellulose is a significant component) and reduce the internal mass-transfer resistance, so that the starch granules are released and hydrolysed by amylase, increasing the starch hydrolysis rates, as a technique for measuring the internal mass-transfer resistance of cell walls. The estimated internal mass-transfer resistances for granular starch hydrolysis in a beaker and stirrer system for simulating the food digestion range from 2.2 × 107 m−1 s at a stirrer speed of 100 rpm to 6.6 × 107 m−1 s at 200 rpm. The reaction rate constants for cellulase-treated starch are about three to eight times as great as those for starch powder. The beaker and stirrer system provides an in vitro model to quantitatively understand external mass-transfer resistance and compare mass-transfer and reaction rate kinetics in starch hydrolysis during food digestion. Particle size analysis indicates that starch cell wall degradation reduces starch granule adhesion (compared with soaked starch samples), though the primary particle sizes are similar, and increases the interfacial surface area, reducing internal mass-transfer resistance and overall mass-transfer resistance. Dimensional analysis (such as the Damköhler numbers, Da, 0.3–0.5) from this in vitro system shows that mass-transfer rates are greater than reaction rates. At the same time, SEM (scanning electron microscopy) images of starch particles indicate significant morphology changes due to the cell wall degradation.

Keywords

• in vitro digestion
• mass transfer
• plant-based food digestion
• starch hydrolysis
• cellulase
• plant cell wall