Investigation of Durability Properties for Lightweight Structural Concrete with Hemp Shives Instead of Aggregate

Abstract

The paper presents the results of testing the performance of lightweight structural concrete containing hemp shives as an aggregate. It has been analysed how the higher binder content and use of the Portland cement affect the thermal and microbiological properties of the lightweight concrete. The aggregates of the plant origin and cement are incompatible because the plant chemical compounds, dissolved in water or an alkaline environment, inhibit cement hydration. To avoid this, mineralisation of the aggregates of plant origin is necessary. The most often used binder in hemp concrete is hydrated lime, a mineraliser. An addition of hydrated lime and sodium trisilicate was used for hemp shiv mineralisation in the tested materials with a cement binder. Concrete containing hemp shiv and cement binder, of which volume share in the concrete was at most 15%, was prepared as a reference concrete. In the remaining three concretes, the total content of the binder in relation to hemp shiv (by mass) was increased 2.5 times. It was shown that lime-binder hemp concrete offers a promising antimicrobial strategy, as it can inhibit bacterial and fungal growth on their surface with superior efficacy. The best results were obtained for tested concretes with the cement–lime binder regarding compressive strength; the average compressive strength was 9.56 MPa.

Keywords

• hemp concrete
• antimicrobial activity
• compressive strength
• thermal conductivity