Experimental and numerical study of shallow‐buried high‐density polyethylene pipeline under collapse touchdown impact

Abstract

Abstract The debris from structures produced during the blasting demolition of engineered buildings (structures) may fall near buried pipelines, which threaten the integrity of the buried gas pipeline. In this paper, the dynamic response of nearby shallow‐buried high‐density polyethylene (HDPE) gas pipelines under collapse impact loads was investigated. The stress‐strain curve and material parameters of the HDPE pipe were obtained through uniaxial tensile tests. The strain distribution of buried pipelines under collapse loading was obtained. Subsequently, a 3D nonlinear finite element (FE) model of a buried HDPE pipeline impacted by a collapsed body was established. Finally, the effects of the impact velocity, touchdown angle, touchdown mode, offset distance, and pavement structure on the mechanical behavior of buried HDPE pipelines were analyzed in detail. The results show that, as the touchdown velocity and angle of the collapsed body increase, the von Mises stress of the pipeline is significantly affected. The pipe section close to the center of the impact zone tends to be damaged due to the von Mises stress reaching the maximum tensile strength. The maximum von Mises stress of the pipeline that is impacted by the edge of the collapsed body is the smallest, but the buried pipeline undergoes the largest displacement. The rigidity of the overlying pavement structure has a significant impact on the reliability of the buried HDPE gas pipeline. The stress concentration areas of buried pipelines mainly appear on the top, bottom, and the arches of the pipeline.

Keywords

• blasting collapse
• finite element analysis
• HDPE gas pipeline
• impact test
• mechanical property
• uniaxial tensile test