Atmospheric Measurement Techniques (Feb 2020)

Wind sensing with drone-mounted wind lidars: proof of concept

  • N. Vasiljević,
  • M. Harris,
  • A. Tegtmeier Pedersen,
  • G. Rolighed Thorsen,
  • M. Pitter,
  • J. Harris,
  • K. Bajpai,
  • M. Courtney

DOI
https://doi.org/10.5194/amt-13-521-2020
Journal volume & issue
Vol. 13
pp. 521 – 536

Abstract

Read online

The fusion of drone and wind lidar technology introduces the exciting possibility of performing high-quality wind measurements virtually anywhere. We present a proof-of-concept (POC) drone–lidar system and report results from several test campaigns that demonstrate its ability to measure accurate wind speeds. The POC system is based on a dual-telescope continuous-wave (CW) lidar, with drone-borne telescopes and ground-based optoelectronics. Commercially available drone and gimbal units are employed. The demonstration campaigns started with a series of comparisons of the wind speed measurements acquired by the POC system to simultaneous measurements performed by nearby mast-based sensors. On average, an agreement down to about 0.1 m s−1 between mast- and drone-based measurements of the horizontal wind speed is found. Subsequently, the extent of the flow disturbance caused by the drone downwash was investigated. These tests vindicated the somewhat conservative choice of lidar measurement ranges made for the initial wind speed comparisons. Overall, the excellent results obtained without any drone motion correction and with fairly primitive drone position control indicate the potential of drone–lidar systems in terms of accuracy and applications. The next steps in the development are outlined and several potential applications are discussed.