Digging Performance and Stress Characteristic of the Excavator Bucket

Abstract

In this study, a dynamic–discrete element-finite element coupling method is proposed to investigate the influence of structural parameters on the excavation performance and stress deformation of the bucket. The main research work is as follows: through ADAMS-EDEM co-simulation of the digging process of the bucket, the digging resistance and the loose force of each part of the bucket are obtained. The influence law of the change of the structural parameters of the excavator bucket on the digging resistance, filling rate and energy consumption is revealed. Through the coupling simulation of EDEM-ANSYS, the loose force is introduced into the finite element model of the bucket to enable the coupling of ADAMS-EDEM-ANSYS. The influence of the change of the bucket structure parameters on the stress and deformation of the bucket components is explored. The results show that the cutting angle and angle of throat of the bucket has a major influence on the digging performance of the bucket. While the angle of the throat and the thickness of the ear plate have a minor influence on the digging performance of the bucket. In the process of excavation, the teeth of the bucket are subjected to the largest digging resistance, resulting in relatively large deformation. All of the components of the bucket are subjected to different degrees of excavation resistance, but the stress concentration at the ear plate is the most obvious. The deformation and stress of the whole bucket can be reduced, to some extent, by reducing the thickness of the ear plate along with increasing the thickness of the stiffening plate. The results can be used to improve the digging performance of the bucket and reduce the stress and deformation of the bucket.

Keywords

• excavator
• bucket
• structural parameters
• mining performance
• stress deformation