Moisture penetration and distribution characterization of hard coal: a µ-CT study

Abstract

Abstract Moisture content of rock/coal can change its mechanical properties and absorption capacities, which can directly affect gas diffusivity, change the stress distribution and hence cause significant impacts on the overall gas or coal extraction process. Observation of the water penetration process and water distribution in the coal matrix will be beneficial for the understanding of the fluid-solid coupling mechanism in hydraulic fracturing, aquifer cracking and coal seam infusion. However, the observation of water penetration process and the determination of water distribution mode were hard to be non-destructively achieved as coal is a non-uniform, inhomogeneous and un-transparent material. µ-CT imaging, which is based on variation of X-ray attenuation related to the density and atomic composition of the scanned objects, enables a four-dimensional (spatial-temporal) visualise of the heterogeneous and anisotropic coal samples. The primary aim of this paper is extending the application of µ-CT imaging to explore the moisture penetration and distribution within coal samples during water infusion process, which has been reported by very little literature. The working principle and procedures of CT imaging was firstly introduced. Then, the determination equation of moisture distribution based on density profile was established. The CT determined moisture content has been compared with weighting method for verification. The paper has demonstrated that µ-CT can be used for non-destructively imaging the moisture distribution within coal samples.

Keywords

• Coal
• Moisture distribution
• µ-CT
• Water saturation