Effect of fibre orientation on the mechanical response of reinforced sand, detected with x-ray tomography

Abstract

The mechanical behaviour of fibre-reinforced sands (FRS) has been thoroughly explored with a laboratory study, firstly investigating the influence of relevant parameters such as grading index, soil density, amount, diameter, and length of fibres then focusing on their orientation with respect to the principal stress directions. This aspect has been deeply investigated performing parallel tests on samples of pure sand and on samples with randomly and uniformly oriented fibres compacted at a similarly high relative density (Dr≈1). Direct and triaxial shear tests have been performed, the former enforcing deformation on a predetermined shear plane. The results show that reinforcement with oriented fibres provides a higher strength and ductility to the sand. The grain scale investigation of the materials’ response to direct shearing has been carried out performing X-ray tomography post-mortem (i.e., after the test). The evolution of porosity in several samples prepared with the same procedure and sheared under the same conditions has been studied freezing the material fabric with nanosilica grout injected at different displacement levels. On the contrary, X-ray tomography performed along with miniature triaxial tests (operando method) enabled the analysis of the spatial distribution of deviatoric strain too. In both cases, maps show the relevant role of fibres orientation with reference to the shear band. If adequately activated, fibres tension modifies the strain field in the samples, preventing the fragile rupture along a shear plane and transferring the stresses to the outer soil portions, in this way providing a more dilatant and ductile overall response of the reinforced material.

Keywords

• fibre reinforced sands
• strain localization
• x-ray tomography
• porosity
• dilatancy