Crystals (May 2024)

Enhancing Photovoltaic Performance with BaTiO<sub>3</sub>/MWCNTs Composite Photoelectrodes in Dye-Sensitized Solar Cells

  • Carlos Armando Polo Bravo,
  • Brayan Yeraldyn Caceres Osnayo,
  • Jesús Alfredo Chacaltana García,
  • Jesús Plácido Medina Salas,
  • Francisco Gamarra Gómez,
  • Hugo Alfredo Torres Muro,
  • Alberto Bacilio Quispe Cohaila,
  • Ramalinga Viswanathan Mangalaraja,
  • Elisban Juani Sacari Sacari

DOI
https://doi.org/10.3390/cryst14060489
Journal volume & issue
Vol. 14, no. 6
p. 489

Abstract

Read online

Dye-sensitized solar cells (DSSCs) have attracted renewed research interest as a potential low-cost substitute for conventional silicon photovoltaics. This work aims to improve the photovoltaic performance of the DSSCs by incorporating multi-walled carbon nanotubes (MWCNTs) into the BaTiO3 photoelectrode. The pure BaTiO3 and BaTiO3/MWCNT nanocomposites were sensitized with N719 dye and fabricated into solar cell devices for testing. The structural characterization confirmed the successful formation of the nanocomposite with an optimal dispersion at 6% of MWCNT incorporation, beyond which agglomeration effects manifested. The optical analysis verified the modulation of defect states and bandgap engineering induced by the MWCNT network. The morphological studies revealed irregular nanoparticle clusters with embedded nanotubes. Solar cell testing under AM1.5G-simulated sunlight demonstrated a peak power conversion efficiency of 4.044% for 6% of MWCNT doping, constituting a 6-fold increment versus pure BaTiO3 (0.693%). It originated from the simultaneous enhancements in the open-circuit voltage and short-circuit current enabled by the favorable band structure alterations and percolation-assisted charge transport. However, further increasing MWCNT content deteriorated the device metrics, owing to emerging limitations like trapping. The rational integration of multi-walled carbon nanotubes with lead-free ferroelectric metal oxides can contribute to the development of emerging organic-inorganic hybrid solar platforms.

Keywords