Effects of Disinfectants Used for COVID-19 Protection on the Color and Translucency of Acrylic Denture Teeth

Abstract

Purpose: This study investigated the color and translucency changes of denture teeth after immersion in disinfectant solutions. Material and Methods: Ten denture teeth (Optostar/Heraeus Kulzer) were immersed in nine different solutions (ethanol 78%, 2-propanol 75%, NaOCl 1%, H2O2 0.5%, glutaraldehyde 2.6%, chlorhexidine 0.12%, povidone-iodine 1%, Listerine Naturals, distilled water) for 3 min to 180 min. L*, a* and b* values were measured before and after their immersion with a contact colorimeter (FRU-WR18/Shenzhen Wave Electronics) over a white and black background, and ΔΕ*ab, ΔΕ00, ΔΤPab and ΔTP00 differences were calculated from baseline measurements. Two-way rmANOVA was used to analyze the data for significant differences among solutions and immersion times at α = 0.05. Results: ΔΕ*ab and ΔΕ00 values were significantly different only across solutions (p ab or 0.12 to 0.93 in ΔΕ00 units. TPab or TP00 translucency parameters showed no significant differences among intervals or solutions (p > 0.050). The mean changes ranged from −0.43 to 0.36 ΔTPab units, and −0.22 to 0.27 in ΔTP00 units. Conclusions: Most of the solutions had no significant effect on the color of teeth compared to the water group. Chlorhexidine 0.12%, glutaraldehyde 2.6% and Listerine produced significant color changes, especially at 180 min. The translucency of teeth was not affected by the solutions, regardless of the type and immersion time.

Keywords

• disinfectant solutions
• COVID-19
• acrylic denture teeth
• color
• translucency