Numerical analysis of geosynthetic-reinforced embankment performance under moving loads

Abstract

The performance of geosynthetic-reinforced embankments under traffic moving loads is always a hotspot in the geotechnical engineering field. A three-dimensional (3D) model of a geosynthetic-reinforced embankment without drainage consolidation was established using the finite element software ABAQUS. In this model, the traffic loads were simulated by two moving loads of rectangular pattern, and their amplitude, range, and moving speed were realized by a Fortran subroutine. The embankment fill was simulated by an equivalent linear viscoelastic model, which can reflect its viscoelasticity. The geogrid was simulated by the truss element, and the geocell was simulated by the membrane element. Infinite elements were utilized to weaken the boundary effect caused by the model geometry at the boundaries. Validation of the established numerical model was conducted by comparing the predicted deformations in the cross-section of the geosynthetic-reinforced embankment with those from the existing literature. On this basis, the dynamic stress and strain distribution in the pavement structure layer of the geosynthetic-reinforced embankment under a moving load was also analyzed. Finally, a parametric study was conducted to examine the influences of the different types of reinforcement, overload, and the moving load velocity on the geosynthetic-reinforced embankment.

Keywords

• Geosynthetic-reinforced layer
• Numerical model
• Moving load
• Embankment
• Deformation
• Stress