A Flexible Triboelectric Nanogenerator Based on Multilayer MXene/Cellulose Nanofibril Composite Film for Patterned Electroluminescence Display

Abstract

The flexible self-powered display system integrating a flexible triboelectric nanogenerator (TENG) and flexible alternating current electroluminescence (ACEL) has attracted increasing attention for its promising potential in human–machine interaction applications. In this work, a performance-enhanced MXene/cellulose nanofibril (CNF)/MXene-based TENG (MCM-TENG) is reported for powering a flexible patterned ACEL device in order to realize self-powered display. The MCM multilayer composite film was self-assembled through the layer-by-layer method. The MCM film concurrently acted as a triboelectric layer and electrode layer due to its high conductivity and strength. Moreover, the effect of CNF concentration and number of layers on the output performance of TENG was investigated. It was found that the MCM-TENG realized the optimum output performance. Finally, a flexible self-powered display device was realized by integrating the flexible TENG and ACEL. The MCM-TENG with an output voltage of ≈90 V at a frequency of 2 Hz was found to be efficient enough to power the ACEL device. Therefore, the as-fabricated flexible TENG demonstrates a promising potential in terms of self-powered displays and human–machine interaction.

Keywords

• triboelectric nanogenerator
• MXene
• cellulose nanofibril
• flexible electronic
• electroluminescence