Controllable preparation and microwave absorption properties of shape anisotropic Fe3O4 nanobelts

Abstract

To substantially prevent electromagnetic threatens, microwave absorbing materials (MAMs) are required to eliminate surplus electromagnetic waves. As a typical MAM, Fe3O4 particles with complex permittivity and permeability have been widely applied due to the coexistence of magnetic loss and dielectric loss. However, the necessary high mass fraction significantly limited its applications, thus Fe3O4 nanostructures have been extensively investigated to overcome this problem. In this work, uniform Fe3O4 nanobelts were prepared by electrospinning and two-step thermal treatment. By controlling the composition and viscosity of the electrospinning precursor solution, Fe3O4 nanobelts with tunable lateral sizes (200 nm–1 μm) were obtained. The samples with low content (only 16.7 wt%) Fe3O4 exhibited wide maximum effective absorbing bandwidths (EAB) over 3 GHz, and Fe3O4 nanobelts with smaller lateral sizes showed a maximum EAB of 4.93 GHz. Meanwhile, Fe3O4 nanobelts with smaller lateral sizes presented superior reflection loss properties, the lowest reflection loss reached −53.93 dB at 10.10 GHz, while the maximum EAB was up to 2.98 GHz. The excellent microwave reflection loss of Fe3O4 nanobelts was contributed to the enhanced synergistic effect of magnetic loss, dielectric loss, and impedance matching, originated from the hierarchically cross-linked networks and shape anisotropies. This study could broaden the practical applications of magnetic absorbers, and provided an approach for the development of shape anisotropic magnetic materials.

Keywords

• Fe3O4
• Nanobelts
• Shape anisotropy
• Microwave absorption
• Reflection loss