Applied Sciences (Oct 2022)

Investigation of the Mechanical Behaviour of Lingulid Sandstone Emphasising the Influence from Pre-Existing Structural Defects, Part 1: Model Identification Based on Static Experiments

  • Pascal Forquin,
  • Mahdi Saadati,
  • Dominique Saletti,
  • Bratislav Lukic,
  • Frederico Schiaffini,
  • Kenneth Weddfelt,
  • Per-Lennart Larsson

DOI
https://doi.org/10.3390/app122110806
Journal volume & issue
Vol. 12, no. 21
p. 10806

Abstract

Read online

A constitutive model able to describe both tensile damage and plastic deformation under confinement is a prerequisite to numerically simulate the behaviour of sandstone rock under an impact loading induced in a percussive drilling process. Therefore, model identification under both tensile and high confinement states is needed. In the present work, an experimental investigation was carried out in order to determine the mechanical properties of a sandstone rock for the purpose of advanced constitutive model identification. Different testing methods were used in quasistatic and dynamic loading regimes. This first part of the study is dedicated to static experiments, whereby three-point bend tests were first performed to evaluate the quasistatic tensile strength of the rock and its distribution by employing the Weibull statistics. Secondly, direct compression tests were conducted to evaluate the stiffness and strength in an unconfined condition. Afterwards, quasioedometric compression (QOC) tests were carried out in order to obtain the deviatoric and volumetric behaviours of the material as a function of the hydrostatic pressure (up to 375 MPa). In these QOC tests, the metallic confinement cell was instrumented with strain gauges to deduce the state of the stress and strain within the sample. A linear volumetric response along with a continuous increase of strength with the level of hydrostatic pressure was observed. This experimental work points out that, under unconfined loading (three-point bending and uniaxial compression), pre-existing structural defects play a major role leading to a highly scattered behaviour in terms of sample stiffness and ultimate applied load. On the other hand, under high confinement levels (QOC tests), beyond the nonlinear response of the curve foot, the influence from structural defects was observed to be small.

Keywords