Dependence of microstructure and properties in additive manufactured 18Ni300 on heat treatment and surface enhancement

Abstract

Selective laser melting (SLM) known as a rapid manufacturing technology can fabricate complex and dense metallic components of 18Ni300 with excellent properties. The performance of 18Ni300 can be improved by intermetallics using heat treatment, not including anti-corrosion property. In this study, the effects of heat and coating treatments on microstructure and properties of 18Ni300 fabricated by SLM were investigated. The characterization results indicated that grain coarsening, dislocation reduction, and texture strengthening occurred after the optimal heat treatment. The sequential processing of 820 °C for 2 h and 480 °C for 3 h can maximize the microhardness (increased by 74 %) and ultimate tensile strength (increased by 79 %), accompanying cost of Charpy impact (reduced by 43 %) and elongation (decreased by 32 %). However, excessively high or low aging temperature and time can lead to insufficient performance improvement because of austenite reversal. In addition, the great interface bonding is observed after the laser cladding coating treatment, and the wear resistance maintains well while improving the anti-corrosion property significantly with low quality loss.

Keywords

• Selective laser melting
• 18Ni300
• Heat and coating treatments
• Laser cladding
• Anti-corrosion property