Comprehensive Estimation of Changes in the Microgeometry of Steel 45 by Ultrasonic Plastic Deformation with a Free Deforming Element

Abstract

A method of ultrasonic surface plastic deformation is widely used to change the properties of the surface layers of metal products. Under the influence of this type of treatment, the structure of the material changes, microhardness increases, roughness decreases, internal tensile stresses are removed, and compressive stresses are created. Now many types of ultrasonic surface plastic deformation have been developed, which differ in the degree of impact on the material. The object of this paper is to study the change in the microgeometry of steel 45 (ASTM M1044; DIN C45; GB 45) under the action of ultrasonic plastic deformation by a free deforming element (indenter in the form of a surface rolling ball). During the study, factors that have the greatest influence on the change in the microgeometry of the sample during treatment were identified. These include the initial roughness of the sample, the number of passes of the indenter, the feed of the indenter, the force with which the indenter is pressed to the treated surface, and the amplitude of the oscillations of the ultrasonic horn. The paper presents the dependences of changes in the main roughness parameters on the above factors. The value of the initial roughness at which it is possible to obtain a uniform surface microrelief is determined. The optimization of treatment parameters providing a change in the height and step parameters of roughness was carried out. Recommendations for choosing the most effective technological modes of ultrasonic treatment of steel 45 with a surface rolling ball are given.

Keywords

• ultrasound
• surface deformation
• surface roughness
• deforming element
• ultrasonic transducer