Power Stability Optimization Design of Three-Dimensional Wireless Power Transmission System in Multi-Load Application Scenarios

Abstract

Recently, most wireless power transmission (WPT) systems have used a “one-to-one” charging method of one receiving coil to one transmitting coil. However, when the receiving coil is offset in this way, the mutual inductance between the transmitting and receiving coils will be weakened, and the flexibility of the WPT system application will also be reduced. Therefore, how to realize the “one-to-many” transmission mode of one transmitting coil to multiple receiving coils and ensure the power stability of multiple loads is an urgent problem to be solved. In order to solve the above problems, the LCC-S topology is combined with the three-phase circuit, and a three-phase omnidirectional WPT system coil scheme is proposed based on the power characteristics of the three-phase LCC-S topology in this paper. Firstly, the influence of the resonance compensation topology on power characteristics is analyzed through circuit theory and a more suitable LCC-S topology is chosen. Then, the optimal coil scheme of the three-phase omnidirectional WPT system is proposed based on the law of mutual inductance. Compared with the original scheme, the theoretical calculation results show that the power fluctuation of the system is reduced by 75.13%. Finally, a set of three-phase WPT system model and test systems similar to the theory are established, which effectively verify the improvement of the proposed scheme, and verify the correctness and feasibility of the scheme.

Keywords

• Wireless power transfer
• multi-load power transmission
• three-phase omnidirectional wireless power transmission system
• coil design
• LCC-S topology
• power stabilization