Fouling of Polyalkylmethylsiloxane Composite Membranes during Pervaporation Separation of ABE-Fermentation Mixtures

Abstract

Production of bio-alcohols is one of the approaches used in the development of alternative energy. Pervaporation is a promising option for the separation of bio-alcohols from the fermentation mixture. A serious problem in the process of continuous extraction of biobutanol from the fermentation broth is the contamination of the membrane, which leads to a decrease in its permeability over time. In this work, the transport properties of composite membranes based on polyheptylmethylsiloxane (PHeptMS), polydecylmethylsiloxane (PDecMS), and a commercial membrane MDK-3 were studied during separation of a real ABE-fermentation broth in vacuum pervaporation mode. The study was performed before and after continuous contact of the membranes with the fermentation broth for one month. Visually and by scanning electron spectroscopy, the presence of membrane surface residue and its effect on the wettability of the membrane selective layer by the components of the ABE broth were determined. The sediment composition was evaluated by energy dispersive analysis and infrared spectroscopy. According to the pervaporation separation of the ABE-broth using PHeptMS, PDecMS, and MDK-3 membranes, the butanol flux was 0.029, 0.012, and 0.054 kg/(m2·h), respectively. The butanol-water partition factor was 41, 22, and 13 for PHeptMS, PDecMS, and MDK-3, respectively. After one month of incubation of the membranes in ABE-fermentation broth during the separation of the model mixture, a decrease of 10 and 5% in permeate flux and separation factor, respectively, was observed for all membranes. Temperature dependences (30–60 °C) of permeate flux, permeability, and selectivity were obtained for the membranes after clogging. The most promising in terms of minimal negative changes as a result of fouling was demonstrated by the PHeptMS membrane. For it, the clogging dynamics during separation of the real fermentation broth for 216 h were investigated. Two characteristic steps of decrease in transport and separation properties were observed, after 28 and 150 h of the experiment. After 216 h of experiment, a 1.28-fold decrease in total flux through the membrane, a 9% decrease in butanol permeability, and a 10% decrease in n-butanol selectivity were found for PHeptMS.

Keywords

• fouling
• ABE-fermentation broth
• pervaporation
• polyalkylmethylsiloxane
• composite membrane