Fabrication of High-Performance Densified Wood via High-Pressure Steam Treatment and Hot-Pressing

Abstract

The fabrication of sustainable structural materials with high physical properties to replace engineering plastics is a major challenge for modern industry, and wood, as the most abundant sustainable natural raw material on the planet, has received a great deal of attention from researchers. Researchers have made efforts to enhance the physical properties of wood in order to replace plastics. However, it is also difficult to meet practical demands at a low cost. Herein, we report a simple and efficient top-down strategy to transform bulk natural basswood into a high-performance structural material. This three-step strategy involves partial removal of hemicellulose and lignin via treating basswood by boiling an aqueous mixture of NaOH and Na2SO3, and a high-pressure steam treatment (HPST) was applied to delignified wood followed by hot-pressing, which allowed the wood to absorb moisture uniformly and quickly. HPST-treated dense delignified wood (HDDW) has a tensile strength of ~420 MPa, which is 6.5 times better than natural basswood (~65 MPa). We systematically investigated the various factors affecting the tensile strength of this wood material and explored the reasons why these factors affect the tensile strength, as well as the intrinsic connection between the moisture absorbed through HPST and the increased tensile strength of HDDW. Through our experiments, we realized the enhancement mechanism of HDDW and the optimal experimental conditions for the fabrication of HDDW.

Keywords

• wood material
• sustainable structural material
• top-down strategy
• steam treatment