Wear Performance of Metal Materials Fabricated by Powder Bed Fusion: A Literature Review

Abstract

Powder Bed Fusion (PBF) is an additive manufacturing technology used to produce metal-based materials. PBF materials have a unique microstructure as a result from repeated and sharp heating/cooling cycles. Many researches have been carried out on relations between processing parameters of the PBF technology, obtained microstructures and mechanical properties. However, there are few studies on the tribological properties of PBF materials at various contact conditions. This article describes previous and recent studies related to the friction performance. This is a critical aspect if PBF materials are applied to friction pair components. This paper discusses wear rates and wear mechanisms of PBF materials under dry friction, boundary lubrication and micro-motion conditions. PBF materials have higher hardness due to fine grains. PBF materials have a higher wear resistance than traditional materials due to their solid solution strengthening. In addition, hard particles on the surface of PBF components can effectively reduce wear. The reasonable combination of process parameters can effectively improve the density of parts and thus further improve the wear resistance. This review paper summarized the wear behavior of PBF materials, the wear mechanism of metal materials from dry friction to different lubrication conditions, and the wear behavior under fretting wear. This will help to control the processing parameters and material powder composition of parts, so as to achieve the required material properties of parts and further improve the wear performance.

Keywords

• additive manufacturing
• powder bed fusion
• wear resistant materials
• material properties
• friction