Forests (Jul 2022)
Measuring the Tree Height of <i>Picea crassifolia</i> in Alpine Mountain Forests in Northwest China Based on UAV-LiDAR
Abstract
Forests in alpine mountainous regions are sensitive to global climate change. Accurate measurement of tree height is essential for forest aboveground biomass estimation. Unmanned aerial vehicle light detection and ranging (UAV-LiDAR) in tree height estimation has been extensively used in forestry inventories. This study investigated the influence of varying flight heights and point cloud densities on the extraction of tree height, and four flight heights (i.e., 85, 115, 145, and 175 m) were set in three Picea crassifolia plots in the Qilian Mountains. After point cloud data were classified, tree height was extracted from a canopy height model (CHM) on the basis of the individual tree segmentation. Through comparison with ground measurements, the tree height estimations of different flight heights and point cloud densities were analyzed. The results indicated that (1) with a flight height of 85 m, the tree height estimation achieved the highest accuracy (R2 = 0.75, RMSE = 2.65), and the lowest accuracy occurred at a height of 175 m (R2 = 0.65, RMSE = 3.00). (2) The accuracy of the tree height estimation decreased as the point cloud density decreased. The accuracies of tree height estimation from low-point cloud density (R2 = 0.70, RMSE = 2.75) and medium density (R2 = 0.69, RMSE = 2.80) were comparable. (3) Tree height was slightly underestimated in most cases when CHM-based segmentation methods were used. Consequently, a flight height of 145 m was more applicable for maintaining tree height estimation accuracy and assuring the safety of UAVs flying in alpine mountain regions. A point cloud density of 125–185 pts/m2 can guarantee tree height estimation accuracy. The results of this study could potentially improve tree height estimation and provide available UAV-LiDAR flight parameters in alpine mountainous regions in Northwest China.
Keywords
