Geometric Effects Analysis and Verification of V-Shaped Support Interference on Blended Wing Body Aircraft

Abstract

A special V-shaped support for blended wing body aircraft was designed and applied in high-speed wind tunnel tests. In order to reduce the support interference and explore the design criteria of the V-shaped support, interference characteristics and geometric parameter effects of V-shaped support on blended wing body aircraft were numerically studied. According to the numerical results, the corresponding dummy V-shaped supports were designed and manufactured, and verification tests was conducted in a 2.4 m × 2.4 m transonic wind tunnel. The test results were in good agreement with the numerical simulation. Results indicated that pitching moment of blended wing body aircraft is quite sensitive to the V-shaped support geometric parameters, and the influence of the inflection angle is the most serious. To minimize the pitching moment interference, the straight-section diameter and inflection angle should be increased while the straight-section length should be shortened. The results could be used to design special V-shaped support for blended wing body aircraft in wind tunnel tests, reduce support interference, and improve the accuracy of test results.

Keywords

• support interference
• v-shaped support
• blended wing body
• geometric parameters
• cfd
• wind tunnel test