Re-Optimized Design for the ADR-Based Dual-Loop Controller of 100 m Class Aperture Radio Telescope

Abstract

Pointing accuracy is a crucial performance index for a fully steerable large-aperture radio telescope and is subject to external and internal disturbances. Improvement of the antenna’s servo control performance is meaningful for pointing, especially for blind pointing of the antenna. This paper firstly establishes a multi-motor-driving four-degrees-of-freedom (DOF) model of an antenna servo system, then optimizes the original design consisting of the active disturbance rejection (ADR)-based velocity controller and lead–lag-based position controller, making the velocity controller a novel linear ADR-based controller coupled with a disturbance-velocity compensation (DLADRC) and the position controller the simplest proportional (P) controller. Simulation results based on a 100 m class radio telescope servo model indicate that the new control system’s velocity-loop response is smoother, the position-loop peak disturbance response is reduced by 17.8%, the position-loop dynamic performance with the short settling time and slight overshoot remains the same as the former PD-LADRC system, and the RMS pointing/tracking error is 2.16 arcsec under a mean wind of 3 m/s, less than the design specification of 2.5 arcsec RMS required.

Keywords

• large-aperture radio telescope
• pointing accuracy
• anti-disturbance
• dynamic performance