Thermally Induced Moisture Flow in a Silty Sand under a 1-D Thermal Gradient

Abstract

Thermally induced moisture flow in unsaturated soils involves complex coupled thermal–hydro processes with the moisture flow in both the vapor and liquid phases. The accurate measurement of the moisture flow in unsaturated sands remains a challenging task due to low moisture migration, the temperature effect on moisture sensors, and the gravity effect on moisture flow. This study aims to accurately measure transient moisture flow, heat transfer, and thermal conductivity in a silty sand with 35% non-plastic fines in a closed heat cell with a controlled 1-D temperature gradient. The heat cell consists of two temperature-controlled heat exchanger plates, heat flux sensors, moisture sensors, thermocouples, and thermal conductivity sensors. The soil moisture sensors were calibrated in the test soil at room temperature and then at elevated incremental temperatures. Soil samples compacted at various initial moisture contents were tested under a constant 1-D temperature gradient of 4 °C/cm. Soil moisture redistribution, temperature, and thermal conductivity profiles were determined from the test results. Transient temperature responses indicated that a lower initial moisture content led to a higher temperature drop after reaching the peak, or a more concaved temperature profile in a steady state due to enhanced moisture migration driven by the temperature gradients. Dry soils exhibited uniform thermal properties, while moist soils showed varying thermal conductivity profiles. A critical moisture content was identified when the maximum moisture migration occurred. Thermal conductivity in soils increased with the distance from the heat source due to thermally induced moisture migration. These findings provide valuable insights into coupled moisture–heat flow dynamics in unsaturated sands.

Keywords

• thermally induced moisture flow
• critical moisture content
• coupled thermos–hydro processes
• unsaturated sand