Non-chemical weed management: Harnessing flame weeding for effective weed control

Abstract

The goal of the current study was to create and assess the effectiveness of a hand-pulled ergonomically designed flame weeder. The developed weeder was tested in the field at three operating pressures (20, 30 and 40 Psi) and forward speeds (1.00, 1.25 and 1.50 km/h) to study their effects on plant damage, survival rates, weight preservation rates, weed management effectiveness, soil temperatures, and gas and energy consumption. Thereafter, at optimized values of forward speed and operating pressure, a comparative assessment of flame weeding with traditional methods (mechanical and manual weeding) was done in terms of weed control effectiveness, operational time, energy consumption, and cost of operation. Results showed that the optimal performance of the designed flame weeder was achieved when operated at a speed of 1 km/h and an operating pressure of 40 psi. The survival rate, weight preservation rate, weed control efficiency, change in soil temperature, recovery rate, plant damage, gas consumption, and energy consumption were observed to be 27.3 %, 32.5 %, 91.1 %, 40.74 °C, 8.5 %, 2.2 %, 4.05 kg/h, and 2500.24 MJ/ha, respectively, at optimized values of forward speed (1.00 km/h) and operating pressure (40 Psi). The actual field capacity, field efficiency and operating cost of the flame weeder were 0.0755 ha/h, 94.94 %, and 3620.81 ₹/ha, respectively. Hand weeding had the best level of weed control effectiveness, but it was a laborious, time-consuming process. When compared to manual weeding, flame weeding was 50.42 % cheaper and 94.82 % faster.

Keywords

• Flame weeder
• Thermal weed control
• Weed control efficiency
• Energy consumption
• Recovery rate