Crystallographic texture evolution in electron beam melting additive manufacturing of pure Molybdenum

Abstract

Additive manufacturing (AM) technologies offer novel opportunities for processing difficult to cast refractory materials. Electron beam melting (EBM) AM is particularly attractive as the rapidly moving electron beam can be utilized to heat the powder bed which mitigates against some process induced cracking mechanisms. A great deal of prior work has been done to investigate laser based processing of molybdenum but little EBM focused work currently exists. In this work we investigate EBM processed molybdenum and observe sharp 001,111, and mixed 001 & 111 crystallographic fibers in the build direction. The apparent preference between these build direction fibers is dependent on the imposed energy density and this is likely explained by the weld pool shape. Detailed microscopy reveals that the observed columnar grains consist of much finer equiaxed low angle boundary subgrains suggesting large process induced stresses leading to appreciable plastic deformation. The implications resulting from this work are that molybdenum may be processed crack-free via EBM AM and that fiber-switching may be controlled, and exploited, towards fabricating components with optimized performance.

Keywords

• Molybdenum
• Crystallographic texture
• Electron beam melting
• Additive manufacturing