Minerals (Sep 2020)
A Multiproxy Approach to the Reconstruction of an Ancient Manufacturing Technology: A Case Study of a Faience Ptolemaic Bowl from Tell Atrib (Nile Delta)
Abstract
Faience objects produced from the fourth millennium BC in ancient Egypt are considered as the first high-tech ceramics in human history. Despite extensive studies on manufacturing technology, many aspects of this complex technology remain a mystery and there is no methodology in place to unravel the techniques of Egyptian faience object production. Detailed studies presented herein fill the gaps, verifying standing opinions and allowing certain aspects of faience manufacturing technology to be reconstructed. The object of this innovative investigation is a hemispherical faience bowl discovered by archaeologists excavating a Ptolemaic workshop district at the site of Tell Atrib in the southern Nile Delta. The multiproxy analysis included the application of specialised software and preparation techniques coupled with complementary methods of light and digital microscopy, SEM with EDS, XRD, STA with EGA, as well as image analysis. Sources of raw and accessory materials (mineral and organic binders, fluxes, colourants) used for preparing the silica paste and glaze slurry were determined. The results helped to reconstruct how the raw material was prepared and how faience vessels were made. The bowl was moulded by compression using a two-part mould. The moulded and dried bowl was then covered by glaze slurry using the application method. A synthetic colourant, Egyptian Blue, was probably used to colour the glaze. The item was fired once at a temperature of 1050–1150 °C. Oxidised conditions were maintained in the kiln during the firing process and firing at the maximal temperature was relatively short. Application of the multiproxy approach has shed light on the technological aspects of faience bowl manufacturing. The obtained results have confirmed the usefulness of the comprehensive methodology that was applied for the reconstruction of particular manufacturing stages of faience objects.
Keywords