AgriEngineering (May 2024)
Evaluation of Radio Frequency Identification Power and Unmanned Aerial Vehicle Altitude in Plant Inventory Applications
Abstract
In the business of growing and selling ornamental plants, it is important to keep track of plants from nursery to distribution. Radio Frequency Identification (RFID) technology provides an easier tracking method for inventories of plants by attaching tags with unique identifiers. Due to the vast area of most nurseries, there is a need to have an efficient method of scanning RFID tags. This paper investigates the use of drones and RFID, specifically, the effects of RFID reader power and flight altitude on tag counts. The experimental setup evaluated three RFID reader power levels (15 dBm, 20 dBm, and 27 dBm), three flight altitudes (3 m, 5 m, and 7 m), the number of passes (one or two), and two plant types (‘Green Giant’ arborvitae and ‘Sky Pencil’ holly). For RFID tags, four types were used (L5, L6, L8, and L9), with two antenna types (dog-bone and square-wave) and two attachment types (loop-lock and stake). For each power level, the UAV was flown to three different altitudes of 3 m, 5 m, and 7 m above the ground. At each altitude, two scan passes were performed at a constant speed of approximately 1.5 m/s. Each plot of plants (two in total) was randomly tagged with a total of 40 RFID tags per plot. Field data were collected from September to December 2023 (on a total of eight dates). The data showed that a power level of 15 dBm and an altitude of 3 m yielded a tag count of 53%, while counts of 34% and 16% were achieved at 5 m and 7 m, respectively. At 20 dBm and an altitude of 3 m, the count accuracy across all tag types and both plants was 90%. When the altitude was increased to 5 m and 7 m, tag-count accuracy dropped to 75% and 33%, respectively. The highest count accuracy was observed at 27 dBm and an altitude of 3 m, with a reading accuracy of 98%. Tag types L6 and L9 performed better at any power level and altitude, while L5 and L8 performed well at a higher power level and lower altitude. In this experiment, canopy properties (size and shape) had no effect on the number of tags read. This study aimed to evaluate the RFID power and UAV altitude achieving the highest accuracy in scanning the RFID tags. Furthermore, it also assessed the effects of plant growth on the scanning efficiency and accuracy of the system.
Keywords
