Mathematical modelling of waste activated sludge thermal disintegration

Abstract

Chemical Oxygen Demand (COD) solubilisation was used to evaluate the impact of thermal pretreatment on the transfer of sewage sludge from particulate to soluble phase. It was gathering the experimental data needed for building of empirical mathematical model describing the relation between applied temperature and time and rate of COD solubilisation and degradation. In view of repeated measurements, in order to describe the relationship between changes in the fraction of dissolved COD and the time and temperature, mixed models have been adopted where by fixed factor measurement conditions have been adopted: time and temperature, while the random factor changes the characteristics of waste activated sludge. Linear and logistic nonlinear mixed models were analyzed. The tests demonstrated that all variables are statistically significant in assessing their impact on the efficiency of liquefaction of sludge. On the basis of the estimated model, the temperature rise of 10°C increases degree of disintegration 1.7% above the average treatment time for 0.5h, by 2.6% for 1 hour, and by 3.9% for 2h. COD values decrease between 3 to 23% at temperatures in the range of 55 to 115°C. At higher temperatures COD was reduced in the range of 32 to 44%. Disintegration time did not have the significant impact on the degradation effect.