Mechanical, Durability, and Gamma Ray Shielding Characteristics of Heavyweight Concrete Containing Serpentine Aggregates and Lead Waste Slag

Abstract

Heavyweight concrete is used to prevent harmful radiation for the construction of hospital, military, and nuclear power plants and also to increase the durability for the construction of marine concrete structures. In this research, using a combination of serpentine aggregates and lead slag, the mechanical, durability, impact resistance, and shielding properties of heavyweight concrete were examined. The variables included fine and coarse serpentine aggregates, which were replaced with normal fine and coarse aggregates in amounts of 0, 25, 50, and 100 percent, respectively. The lead slag in all samples was considered constant. Slump, compressive strength, flexural strength, water penetration depth, impact resistance (drop hammer), and gamma ray attenuation coefficient tests were conducted. The chemical composition of serpentine aggregates and lead slag were evaluated by X-ray powder diffraction. The results showed that the density and linear attenuation coefficient (LAC) increased with the increase of fine and coarse serpentine aggregates in heavyweight concrete containing lead slag. The highest density and LAC were obtained in a sample in which 100% fine serpentine aggregates and 100% coarse serpentine aggregates were used. Using 25% of serpentine fine aggregates and 25% of serpentine coarse aggregates in heavyweight concrete samples containing lead slag has achieved the highest compressive strength and flexural strength. But with the increase of fine and coarse serpentine aggregates to more than 25%, the upward trend of increasing compressive strength decreased. Silica constitutes a large part of the chemical structure of serpentine aggregates (about 42%). Increasing the amount of serpentine aggregates in concrete mixes leads to excessive release of calcium hydroxide in concrete. This issue can lead to the formation of a weak zone in concrete and decrease the compressive and impact resistance.