Preparation of 3D Frame Material for Lithium Metal Battery Anode Based on Waste Lithium-ion Battery Anode Graphite

Abstract

With the increase of waste lithium-ion batteries (WLIBs), the recycling of WLIBs has been paid more attention. Lithium metal battery (LMB) has extremely high theoretical specific capacity. However, the decline of cycle performance and the danger of short circuit caused by lithium dendrite formation and dead lithium accumulation are still the most thorny problems for the anode of LMB. Herein, the high value utilization of WLIBs anode graphite was explored, and it was prepared as a 3D frame material for LMB. Liquid-phase reduced graphite oxide nanosheets (lrGO) were prepared from AG, then, ZnO nanoparticles were loaded on lrGO. SEM, EDX and XRD were used to characterize lrGO and lrGO-ZnO , and the electrochemical tests were carried out. The results showed that lrGO and lrGO-ZnO maintained excellent cycle stability. Under the constant current density of 1mA cm-2, the stable cycle of lrGO-ZnO was 700 cycles, and the charge-discharge platform potential difference maintained at 22.5 mV after 200th cycle. The unique 3D structure of lrGO increased the electrode reaction area and suppressed the volume expansion of Li. The loading of ZnO significantly improved the lithiophilicity and cycle stability.