Machinery & Energetics (Feb 2024)

Investigation of deformation of the spring tooth of agricultural implements from the action of the force applied to it

  • S. Pylypaka,
  • T. Volina,
  • V. Hropost,
  • O. Kozlova,
  • O. Tatsenko

DOI
https://doi.org/10.31548/machinery/1.2024.23
Journal volume & issue
Vol. 15, no. 1
pp. 23 – 32

Abstract

Read online

The relevance of the study lies in the need to investigate the dependence of the force applied to the spring tooth on its parameters, which is an important task due to the widespread use of spring teeth in agricultural implements, such as balers, reapers, rakes, etc. The purpose of the study is to establish an analytical description of the spring tooth deformation depending on the amount of applied force. For this purpose, the theory of bending rods from the resistance of materials was applied, without simplifying it, as is common in construction, where the deflection of a beam is small compared to its length. The calculation is based on the well-known dependence of the curvature of the elastic axis of the beam (tooth) on the applied moment and the stiffness of its cross-section. The study considers a cantilevered tooth, which at the point of pinching is a spring with several turns, followed by a smooth transition to a rectilinear shape. The tooth is divided into two parts along its length: curvilinear and rectilinear. Calculation of the deformation, i.e., finding the shape of the elastic axis after the action of the applied force, is carried out for both parts separately. The need for this approach is dictated by the fact that the curvature of the elastic axis of the tooth in the free state changes abruptly from the stable value of the curvilinear part to a zero value of the straight part. The main result of the study is to find the shape of the elastic axis of individual parts of the tooth under the action of the applied force and combine them into one whole. This helps to determine the amount of movement of the free end of the tooth depending on the amount of force applied to it. The application of the obtained data can help in the development of more efficient and productive agricultural tools, and increase their durability and efficiency when interacting with the soil

Keywords