Metals (Oct 2021)

Enhancement of Medium-Carbon Steel Corrosion and Wear Resistance by Plasma Electrolytic Nitriding and Polishing

  • Andrey Apelfeld,
  • Anatoly Borisov,
  • Ilya Dyakov,
  • Sergey Grigoriev,
  • Boris Krit,
  • Sergei Kusmanov,
  • Sergey Silkin,
  • Igor Suminov,
  • Ivan Tambovskiy

DOI
https://doi.org/10.3390/met11101599
Journal volume & issue
Vol. 11, no. 10
p. 1599

Abstract

Read online

The influence of technological parameters of plasma electrolytic nitriding and polishing on the wear resistance and corrosion resistance of medium-carbon steel is considered. The morphology and roughness of the surface, phase composition and microhardness of the modified layer have been investigated. Wear resistance was studied under dry friction conditions with bearing steel as counter-body. It was found that plasma electrolytic polishing removes the loose part of the oxide layer and provides a two-fold decrease in surface roughness compared with untreated steel, and 2.8 times compared with the nitrided one. Combined processing at optimal technological parameters leads to an increase in microhardness up to 1130 HV, an increase in wear resistance by 70 times, and a decrease in the corrosion current density by almost 3 times in comparison with untreated steel.

Keywords