Research on Seismic Wave Delay and Amplification Methods in the Shaking Table Test of Large-Span Structures in Mountain Areas

Abstract

The traveling wave and slope amplification effects should be considered in the shaking table test of large-span structures in mountain areas. Based on the structural characteristics and site conditions of a large-span structure in a mountain area, this paper designed a high-rise steel frame structure with viscous dampers through finite element analysis to amplify seismic waves with a time delay. Then, the original structure and steel frame models with a similarity ratio of 1/40 were made for shaking table tests. The test results showed that a high-rise steel frame structure with reasonable viscous dampers could delay and amplify seismic waves, and the scaled model of the structure could play the same role in shaking table tests. Meanwhile, by comparing the seismic responses of large-span structural models in mountain areas before and after the amplification of seismic wave delays, it was found that the delay and amplification of seismic waves had little impact on the acceleration response of the structure. In contrast, the seismic wave delay played a dominant role in the change in the structural displacement response.

Keywords

• large-span structures
• viscous damper
• high-rise steel frame structure
• seismic wave delay and amplification
• finite element model (FE Model)
• shaking table test