Strengthening of steel member using unbonded CFRP laminates

Abstract

Excellent mechanical and physical properties make carbon fiber reinforced polymer (CFRP) the best options for repair, retrofit, and rehabilitation of civil engineering structures. A great success on application of this material in reinforced concrete (RC) structures has attracted much attention from many researchers to develop it in combination with steel. The number of studies on the use of CFRP composites for strengthening steel structures has still been limited and needs to be more explored. To date, the research in this field has mainly focused on CFRP strengthening with adhesively-bonded technique. This paper reports an experimental study to investigate the performance of slender axial compression steel members partially strengthened with unbonded CFRP composites. The requirements for stiffener to prevent buckling occurred in stiffening region are derived from structural equilibrium conditions. Vacuum-assisted Resin Transfer Molding (VaRTM) method is adopted to form CFRP laminates in the strengthened specimens. Totally eight small scale specimens are tested, and it is clear from the test that improvement in load-carrying capacity can be achieved by using CFRP.