Installed Fan Noise Simulation of a Supersonic Business Aircraft

Abstract

Overcoming the problem of excessive engine noise at low altitudes is a formidable task on the way to developing a supersonic passenger aircraft. The focus of this paper is on the fan noise shielding during take-off, investigated as part of the DLR project ELTON SST (estimation of landing and take-off noise of supersonic transport) for an in-house aircraft design. The supersonic inlet is required to provide the proper quantity and uniformity of air to the engine over a wider range of flight conditions than the subsonic inlet. For passenger aircraft, the noise problem influences engine integration and placement, and the new generation of supersonic transport would require innovative engineering solutions in order to come up with an efficient low-noise design. Potential solutions are evaluated using DLR tools capable of accurate source generation and noise propagation to the far-field. For low-speed aircraft operation, the method of choice is a strongly coupled volume-resolving discontinuous Galerkin (DG) and fast multipole boundary element method (FM-BEM) which is applied due to a large disparity between the Mach numbers on the interior and exterior of the inlet. The method is used for obtaining the acoustic signature of the full-scale model at realistic flight points, including the application of the programmed lapse rate (PLR), which involves simulations at higher pitch angles than for the reference flight path. The results show that the proposed method is highly suitable for obtaining accurate noise footprints during the low-speed phase and could be used to assist with certification procedures of future supersonic aircraft.

Keywords

• noise shielding
• fan noise
• supersonic aircraft
• acoustic simulation
• CAA
• noise certification