Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Energy Materials & 3D Printing Laboratory (3D-ENERMAT), Renewable Energy Research Institute, University of Castilla-La Mancha (UCLM) , C/ de la Investigación 1, Building 3, Albacete 02071, Spain
Additive manufacturing techniques have the potential to promote a paradigmatic change in the electrode fabrication processes for lithium-ion batteries (LiBs) as they may offer alternative component designs to boost their performance or to customise the application. The present research work explores the use of low-cost fused filament fabrication (FFF) 3D printing to fabricate Li _4 Ti _5 O _12 (LTO) mesh electrodes in the search for enlarged electrochemically active areas. Using different nozzle diameters (ND), we have 3D printed several mesh electrodes that after sintering allow an increase in the surface to volume ratio by up to ≈290% compared to conventional flat cylindrical geometries. As the conventional route to produce 3D printed meshes, i.e. stacking of consecutive layers with a 90° rotation, leads to problems of vertical misalignment that may affect the electrical contact, we have developed a new compact design that maximises the contact between layers. All the 3D printed mesh electrodes with thicknesses of 400 and 800 μ m, exhibit electrochemical performance very close to those of thin (70 μ m) electrodes, e.g. 175 mAh g ^−1 at C/2 in the case of ND = 100 μ m, which is the theoretical capacity value for LTO. At higher C-rates, 800 μ m-thick mesh electrodes with larger ND exhibit a marked drop in the reversible capacity (28 mAh g ^−1 at 8 C), although the values obtained improve notably those of the equivalent thick solid electrode (almost null at 8 C). The compact design demonstrated superior performance at high C-rates, improving by ≈70% the results of the best conventional mesh electrode at 8 C for 800 μ m electrodes. These results highlight the potential of FFF-3D printing to generate novel high aspect ratio geometries and the impact of design and printing parameters on the performance of LiB electrode materials. Exploring alternative efficient geometries may facilitate the integration of thick electrodes in high energy density LiBs.
