Effect of cooling rate in the mid-temperature region on fatigue crack propagation rate of bainitic steel

Abstract

Controlling continuous cooling is an important means to control the most important mechanical properties of bainitic steel for frogs in railroad applications. In this paper, a bainitic steel for railway frogs is taken as the research object. By designing different cooling rates in the bainitic transformation medium temperature region, the effect of cooling rate on fatigue crack propagation rate was studied. The results show the sample of 4 °C/s cooling rate exhibits higher strength and impact toughness, while the crack propagation rate near the threshold is significantly lower and the threshold is relatively higher at 0.1 °C/s cooling rate. This is related to the fact that more massive blocky retained austenite and coarse microstructure in the sample at 0.1 °C/s cooling rate are more favorable to the occurrence of crack closure effect, especially in the near-threshold region. The fatigue crack propagation rate of the tested steel in the stable propagation region at 4 °C/s cooling rate is slightly higher than that at 0.1 °C/s. This is related to its complex interface distribution characteristics. However, with the increase of Δ K, the tested steel at 0.1 °C/s cooling rate tends to preferentially fail, which is related to its poor toughness.

Keywords

• Bainitic steel
• Cooling rate
• Fatigue crack propagation